Monday, November 16, 2026

Router Failure at FAA Site Triggered Nationwide Ground Stop


A newly installed router at an FAA radio facility in El Dorado, Ark., appears to have been the primary cause of Friday’s nationwide air travel disruption, overwhelming the agency’s communications network and forcing a ground stop that affected much of the U.S. aviation system.

According to FAA officials, the router began generating an unusually high volume of network traffic shortly after installation. Data from the Arkansas router, and potentially another device at a radar site in Amarillo, Texas, flooded the FAA Telecommunications Infrastructure (FTI), the aging network that supports air traffic control communications, radar and flight data systems.

The surge disrupted communications at 17 of the FAA’s 22 high-altitude air traffic control centers, leading to static, dropped transmissions and widespread operational issues. FAA technicians restored stability after isolating the two routers from the broader network.



Officials are still investigating whether the outage stemmed from a faulty router, a configuration error by contractor L3Harris Technologies, or another technical issue. Transportation Secretary Sean Duffy said investigators have found no evidence of a cyberattack and are focusing on either a mechanical failure or an installation problem.

The incident also renewed concerns about the FAA's decades-old telecommunications infrastructure, which remains dependent in part on aging copper-wire systems. Federal officials warned that until a network modernization project is completed in 2028, similar disruptions remain a risk.